LA Cigale

114163 - An adjacent table at least 18"x18" (LxW) shall be provided if the food preparation sink does not have an integral drainboard

114268 - Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches

114276, 114149, SF Health Code Section 440.5 - Toilet rooms shall be vented to the outside air by means of an openable, screened window, an air shaft, or a light-switch-activated exhaust fan, consiste

114256 - Lockers or other suitable facilities shall be located in a designated room or area where contamination of food, equipment, utensils, linens, and single-use articles cannot occur

114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial servi

114099 - Provide a 3-compartment sink with two integral metal drainboards for manually washing, rinsing, and sanitizing equipment and utensils

114130, 114169 - Floor-mounted equipment that is not easily movable shall be sealed to the floor

114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration unit

114279, 114281, 114282 - A room, area, or cabinet separated from any food preparation or storage area, or warewashing area shall be provided for the storage of cleaning equipment and supplies

114047, 114153 - Adequate and suitable space shall be provided for the storage of food, on approved shelving with a minimum of 6 inch clearance from the floor

114276, 114149, SF Health Code Section 440.5 - Toilet rooms shall be separated by well-fitted, self-closing doors that prevent the passage of flies, dust or odors

114271(d) - Conduits of all types shall be installed within walls as practicable. When otherwise installed, they shall be mounted or enclosed so as to facilitate cleaning

114130, 114169 - All equipment shall be installed on castors, six (6) inch high round metal legs, or on a minimum four (4) inch high curb or pedestal with a continuously coved base at the juncture

114130, 114169 - Submit specification sheets of proposed equipment to DPH for review and approval, prior to purchase and installation