Mi Palmar

FOOD IN ORIGINAL CONTAINER, PROPERLY LABELED: CUSTOMER ADVISORY POSTED AS NEEDED

MUST PROPERLY LABEL DESSERTS FOR SALE.

FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED

MUST REPAIR OR REPLACE TORN SEATS AT SERVICE COUNTER.MUST REMOVE RUST FROM LOWER SHELF OF PREP TABLE IN REAR PREP AREA.MUST PROVIDE A SPLASHGUARD AT FRONT PREP HAND SINK NEXT TO STEAM TABLE

FOOD AND NON-FOOD CONTACT EQUIPMENT UTENSILS CLEAN, FREE OF ABRASIVE DETERGENTS

MUST CLEAN FOOD DEBRI FROM LOWER SHELF OF PREP TABLE IN REAR PREP AREA,FRYER,GRILL TABLE.

FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED

MUST CLEAN FOOD DEBRI FROM FLOORS ALONG WALLBASES IN PREP AREAS.MUST REPAIR OR REPLACE DAMAGED FLOOR TILES BEHIND PIZZA OVEN & NEAR BASEMENT DOOR.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS

MUST CLEAN DUST BUILD UP ON WALL VENT & CEILING FAN IN DRY FOOD STORAGE AREA.MUST SCRAPE & PAINT PEELING PAINT ON WALL IN DINING AREA.MUST SEAL LOWER WALL BASES BEHIND COOKING EQUIPMENT IN FRONT PREP AREA & LOOSE WALLBASE IN BETWEEN PIPES IN HALLWA...

LIGHTING: REQUIRED MINIMUM FOOT-CANDLES OF LIGHT PROVIDED, FIXTURES SHIELDED

MUST PROVIDE A LIGHT SHIELD OR SHATTER PROOF BULB IN REAR PREP AREA.

TOILET ROOM DOORS SELF CLOSING: DRESSING ROOMS WITH LOCKERS PROVIDED: COMPLETE SEPARATION FROM LIVING/SLEEPING QUARTERS

MUST REPLACE BROKEN SELF CLOSING DEVICE ON REAR TOILET ROOM DOOR.

VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED

MUST REMOVE THREADS FROM FAUCET AT MOP SINK or PROVIDE A HOSE BIB.MUST REPAIR OR REPLACE LEAKY PIPE AT 3- COMP SINK,VENTILATION NOT WORKING IN REAR PREP AREA.

PREMISES MAINTAINED FREE OF LITTER, UNNECESSARY ARTICLES, CLEANING EQUIPMENT PROPERLY STORED

MUST ELEVATE ARTICLES OFF OF FLOOR & AWAY FROM WALLS IN BASEMENT.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS

CEILING NOT MAINTAINED IN REAR PREP AREA. INSTRUCTED TO RESEAL AND/OR REPIANT CEILING. GAP NOTED ALONG WALLBASE IN FRONT PREP AREA. INSTRUCTED TO INSTALL COVING TO SEAL GAP.

LIGHTING: REQUIRED MINIMUM FOOT-CANDLES OF LIGHT PROVIDED, FIXTURES SHIELDED

LIGHT BULB NOT WORKING UNDER EXHAUST HOOD. INSTRUCTED TO REPLACE NON-WORKING BULB. END CAPS NOT PROVIDED ON BULBS IN REAR PREP AREA. INSTRUCTED TO INSTALL END CAPS AND REPLACE WORN LIGHT SHIELDS.

REFRIGERATION AND METAL STEM THERMOMETERS PROVIDED AND CONSPICUOUS

THEMOMETER NOT PROVIDED IN FRONT PREP COOLER. INSTRUCTED TO PROVIDE THERMOMTER CONSPICUOUS INSIDE ALL COOLERS.