Starbucks

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED

OBSERVED TORN GASKETS ON THE INSIDE OF TWO DOOR REACH-IN COOLER IN THE REAR. INSTRUCTED TO REPAIR AND MAINTAIN.

PROCEDURES FOR RESPONDING TO VOMITING AND DIARRHEAL EVENTS

OBSERVED NO KIT AND PROCEDURE ON SITE FOR RESPONDING TO VOMIT AND DIARRHEA AT TIME OF INSPECTION. INSTRUCTED TO MAINTAIN KIT CONTAINING ALL NECESSARY SUPPLIES INCLUDING A SANITIZER RATED AS EFFECTIVE AGAINST NOROVIRUS ON SITE AT ALL TIMES. PRIORITY F...

CONTAMINATION PREVENTED DURING FOOD PREPARATION, STORAGE & DISPLAY

OBSERVED FOOD ITEMS STORED ON FLOOR IN BASEMENT DRY STIRAGE. INSTRUCTED MANAGER TO ELEVATE ALL FOOD SIX INCHES OFF FLOOR.

NON-FOOD/FOOD CONTACT SURFACES CLEAN

OBSERVED RESIDUE ON INTERIOR SURFACE OF ICE MACHINE. INSTRUCTED MANAGER TO CLEAN AND MAINTAIN

PHYSICAL FACILITIES INSTALLED, MAINTAINED & CLEAN

OBSERVED SOILED MOP HEADS NOT PROPERLY STORED. INSTRUCTED MANAGER TO HANG MOP HEADS TO PREVENT INSECT BREEDING.

ADEQUATE VENTILATION & LIGHTING; DESIGNATED AREAS USED

OBSERVED VENT BY THE 3 COMPARTMENT SINK IN NEED OF CLEANING. INSTRUCTED TO CLEAN AND MAINTAIN

ALL FOOD EMPLOYEES HAVE FOOD HANDLER TRAINING

OBSERVED NO FOOD HANDLER CERTIFICATES ON SITE AT TIME OF INSPECTION. INSTRUCTED ALL EMPLOYEES MUST COMPLETE FOOD HANDLER TRAINING AND MAINTAIN RECORDS THEREOF ON SITE AT ALL TIMES.

VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED

OBSERVED THE 3 COMPARTMENT SINK SPRAYER HEAD HOSE IN DISREPAIR AND HANGING BELOW THE FLOOR RIM. INSTRUCTED TO REPAIR AND MAINTAIN ALL PLUMBING.

FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED

MUST CLEAN FLOORS IN THE REAR AREA AT THE CORNERS AND UNDER THE 3-COMP SINK TO REMOVE CRUMBS AND OTHER DEBRI. ALSO DETAIL CLEAN ALL FLOOR DRAINS IN THE REAR AND FRONT AREA TO PREVENT PEST BREEDING.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS

MUST DETAIL CLEAN WALL ACROOS FROM THE COFFEE MACHINE AREA TO REMOVE SPLASHES AND DEAD INSECTS.

VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED

MUST REPAIR LEAK AT THE HOT WATER FAUCET HANDLE AT THE 3-COMP SINK IN THE BACK AREA.

FOOD HANDLER REQUIREMENTS MET

MUST PROVIDE ALL STAFF MEMBERS WITH THEIR IDPH FOOD HANDLER'S CERTIFICATION AT ALL TIMES. MUST PROVIDE FOR THE NEXT ROUTINE INSPECTION.

VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED

3-COMP SINK NOT MOUNTED PROPERLY WHERE WATER IS POOLING AT THE CORNER OF DRAIN BOARD, INSTRUCTED TO REPAIR.

LIGHTING: REQUIRED MINIMUM FOOT-CANDLES OF LIGHT PROVIDED, FIXTURES SHIELDED

MISSING LIGHT SHIELDS AT PASTRY DISPLAY CASE.

FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED

MUST PROVIDEV AN ADEQUATE SNEEZE GUARD AT THE COFFEE MAKING STATION NEXT TO THE CASH REGISTER.

FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED

MUST REPAIR THE LOOSE GASKETS AT THE 2DR REFRIGERATOR.

FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED

MUST CLEAN FLOORS UNDER THE 3-COMP SINK AND DISH MACHINE.

NO EVIDENCE OF RODENT OR INSECT OUTER OPENINGS PROTECTED/RODENT PROOFED, A WRITTEN LOG SHALL BE MAINTAINED AVAILABLE TO THE INSPECTORS

FOUND 25 LIVE SMALL FLIES IN THE FRONT PREP AREA AND 5 IN THE REAR. INSTRUCTED TO ELIMINATE ALL ACTIVITY AND CLEAN AFFECTED AREAS. RECOMMENDED CALLING PEST CONTROL FOR ASSISTANCE IN THE ELIMINATION OF SMALL FLIES. SERIOUS VIOLATION 7-38-020

FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED

MUST REPAINT EXTERIOR OF GREASE TRAP IN REAR.

FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED

MUST DETAIL CLEAN AND MAINTAIN FLOORS IN ALL CORNERS AND UNDER/AROUND ALL HEAVY EQUIPMENTS.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS

MUST PROVIDE MISSING CEILING TILES TO REAR AREA AND SEAL AROUND ALL PIPES/CONDUITS.