MAY 6
2010
PASS 5 violations
FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED
MUST PAINT RAW WOOD SHELVES IN REAR STORAGE AND REPAIR OR REPLACE DAMAGED DOOR ON FRONT REACH-IN FREEZER BY CASH REGISTER.
FOOD AND NON-FOOD CONTACT EQUIPMENT UTENSILS CLEAN, FREE OF ABRASIVE DETERGENTS
MUST DETAIL CLEAN AND MAINTAIN THE FOLLOWING: INTERIOR/EXTERIOR OF COOKING EQUIPMENT, COOLERS/FREEZERS (ESPECIALLY THE RACKS AND RUBBER GASKETS), AND THE SHELVES ABOVE/AROUND 3-COMPARTMENT SINK AND THROUGH OUT.
FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED
MUST REPLACE ALL DAMAGED FLOOR TILES IN PREP/REAR AND DETAIL CLEAN AND MAINTAIN FLOORS IN ALL CORNERS. UNDER/AROUND ALL HEAVY EQUIPMENTS.
WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS
MUST DETAIL CLEAN AND MAINTAIN WALLS/CEILING THROUGH OUT.
VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED
MUST REPAIR AND MAINTAIN THE LEAK AT THE LEFT FAUCET ON THE 4-COMPARTMENT SINK.