JAN 21
2015
PASS 7 violations
FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED
INSTRUCTED TO PROVIDE A SPLASH GUARD/PARTITIONER TO THE REAR EXPOSED HAND WASHING SINK TO SEPARATE IT FROM THE PREP TABLE.
FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED
INSTRUCTED TO REPLACE THE WORN RUBBER GASKETS ON THE FRONT PREP REACH IN COOLER (CLOSEST TO THE WALL). MUST MAINTAIN.
FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED
INSTRUCTED TO SAND OR REPLACE THE CUTTING BOARD IN THE FRONT PREP AREA WITH THE DEEP, DARK GROOVES. MUST MAINTAIN SMOOTH AND EASILY CLEANABLE.
FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED
INSTRUCTED TO REMOVE THE RUST OR REPLACE THE FLOOR TILES IN THE REAR IN FRONT OF THE MOP SINK.
FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED
INSTRUCTED TO CLEAN AND MAINTAIN THE FLOORS IN THE CORNER IN THE REAR.
VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED
INSTRUCTED TO FIX THE LEAK AT THE PIPE UNDER THE EXPOSED HAND WASHING SINK IN THE REAR PREP AREA. MUST MAINTAIN.
VENTILATION: ROOMS AND EQUIPMENT VENTED AS REQUIRED: PLUMBING: INSTALLED AND MAINTAINED
INSTRUCTED TO PROVIDE STOPPERS FOR EACH COMPARTMENT OF THE 3-COMPARTMENT SINK AND MAINTAIN.